XD1228
- Am Fm Stereo Cd Player
- Fm Stereo Receivers
- Xd1228 Am Fm Cd Receiver User Manual Free
- Xd1228 Am Fm Cd Receiver User Manual 2016
INSTALLATION/OWNER'S MANUAL
AM/FM/CD Receiver
Charge Port
Manual Dual XD1228. View the Dual XD1228 manual for free or ask your question to other Dual XD1228 owners. AM/FM/CD Receiver. INSTALLATION/OWNER'S MANUAL. Do you have a question about the Dual XD1228? AM, FM Performance. Equalizer Equalizer bands quantity 3 Product colour Black Compatible memory cards Not supported. AM/FM/CD Receiver XD1228 Charge Port INSTALLATION/OWNER'S MANUAL. 2 XD1228 INSTALLATION Preparation. Press MODE to select between AM/FM, CD or auxiliary input. Modes of operation are indicated in the display. Manual Tuning FM Stereo/Mono.
XD1228 INSTALLATION
- Sony CD Player 4-168-227-11(1) Sony FM/AM Digital Radio CD Player Operating Instructions. Sony CD Player User Manual. See Prices; Sony CD Player CD-X1500. Sony CD PLAYER OWNER'S MANUAL CD-X1500. AIWA OPERATING INSTRUCTIONS STEREO CAR CD RECEIVER CDC-X217 YU. See Prices; Sony CD Player CDC-X304.
- AM/FM/CD/MP3 Receiver User Manual details for FCC ID 2AFXA-XDM280BT made by FengShun Peiying Electro-Acoustic Co., Ltd. Document Includes User Manual manual.
- Out of Stock Sorry, this item is currently out of stock. It'll be back soon.
AM/FM/CD/MP3 Receiver User Manual details for FCC ID 2AFXA-XDM280BT made by FengShun Peiying Electro-Acoustic Co., Ltd. Document Includes User Manual manual.
Preparation
Please read entire manual before installation.
Before You Start
•Disconnect negative battery terminal. Consult a qualified technician for instructions.
•Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
•Remove 2 transit screws located on top of the unit.
•Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
•Install mounting sleeve into opening, bending tabs to secure.
•Connect wiring harness and antenna. Consult a qualified technician if you are unsure.
•Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
•Test for correct operation and slide into mounting sleeve to secure.
•Snap trim ring into place.
Removal Keys
Head Unit
Dashboard or
Mounting Kit
Mounting Sleeve
TYPICAL MOUNTING METHOD
2
XD1228 INSTALLATION
Wiring Diagram
Rear Preamp Output
Connect to amplifier RCA input
RCA Cable
(sold separately)
Antenna Connector
BLUE | Remote Turn-On | AMP |
Connect to amplifier or power | ||
antenna. Insulate wire if not used. | ||
BLACK | Ground | |
Connect to vehicle | ||
chassis ground. | ||
RED | Accessory | |
Connect to ignition | ||
circuit or switched 12 volt source. | ||
5 AMP | ||
AGC Fuse |
YELLOW | Memory |
Connect to battery | |
circuit or constant 12 volt source. | |
Right Front | Right Rear |
Gray/Black (-) | Violet/Black (-) |
Gray (+) | Violet (+) |
Left Front | Left Rear |
White/Black (-) | Green/Black (-) |
White (+) | Green (+) |
FUSE
When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio.
The XD1228 uses one 5 amp AGC fuse located in-line.
* Caution - Do not attach any speaker leads to ground as severe damage will occur.
3
XD1228 OPERATION
Control Locations
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 |
1 | Release | 10 | Preset 6 | ||||||
2 | Volume Knob | 11 | Preset 5 | ||||||
3 | Mute / Power | 12 | Preset 4 / Play / Pause | ||||||
4 | Tune / Track Down | 13 | Preset 3 / Intro | ||||||
5 | Tune / Track Up | 14 | Preset 2 / Random | ||||||
6 | Source | 15 | Preset 1 / Repeat | ||||||
7 | Eject | 16 | Band | ||||||
8 | USB Charging Port | 17 | Display | ||||||
9 | Auxiliary Input | 18 | Audio / Menu |
The XD1228 has an easy-to-use interface that provides a rewarding experience, as well as support for your favorite tunes. Audio CD-R and CD-RW disc playback ensures compatibility with your music collection, and the RCA preamp output provides the right
connections to expand your system. From its front panel auxiliary input for connecting your MP3 player, to the detachable face for security assurance, this head unit has you covered.
4
XD1228 OPERATION
General Operation
Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure.
Semi-permanentRemove trim ring and install supplied #1 x 7/32” Phillips Faceplate Installation head screw through left side of mounting frame into
faceplate.
Power On/Off Press to turn the unit on. Inserting a CD will turn the unit on automatically. Press and hold for three seconds to turn the unit off.
Mode Press MODE to select between AM/FM, CD or auxiliary input. Modes of operation are indicated in the display.
Auxiliary Input Insert a 3.5mm connector in the front panel AUX port. Connect the other end of the 3.5mm connector to the headphone output of an audio device, MP3 player, etc. Press MODE to select AUX mode.
Volume Adjust volume using the volume knob (00-46).
Display The radio frequency (tuner mode) and CD track/elapsed time (CD player mode) will be shown by default. Press DISP to display the clock, and press DISP again to return to default display.
Set the Clock Press and hold DISP for 2 seconds, the clock will begin to flash. Press TRACK nnto adjust the hours and TRACK llto adjust the minutes. Press DISP or wait 5 seconds to save the clock settings.
12/24-hour Clock The clock will display 12-hour AM/PM time in USA frequency spacing mode (PM 10:00). In European frequency spacing mode, the clock will display 24-hour time (22:00).
Reset Press and hold for more than 2 seconds to RESET the unit upon initial installation. The RESET button is located behind the faceplate.
5
XD1228 OPERATION
General Operation
Setup Menu Press and hold AUDIO/MENU for more than 3 seconds to access the setup menu, then press AUDIO/MENU to cycle
through menu options. When desired option appears in the display, rotate the volume knob left/right to adjust or activate the desired function.
Menu Function | Options | Action |
LOUD OFF | Disables the loudness function. | |
Loudness | Enables the loudness function. Activating this feature | |
Curve | LOUD ON | will enhance the bass and treble frequencies when |
listening to music at low volumes. | ||
Tuner | FRE USA | Programs the unit to USA tuner spacing. |
(200kHz for FM and 10kHz for AM). (Tuner mode only) | ||
Frequency | ||
Programs the unit to European tuner spacing. | ||
Spacing | FRE EU | |
(50kHz for FM and 9kHz for AM). (Tuner mode only) | ||
Local/Distance | LOC OFF | Activates distance tuning. |
Tuning | LOC ON | Activates local tuning for strong station reception only. |
CLK ON | Programs unit to display the clock when the power is | |
Clock | off. | |
Display | CLK OFF | Programs unit to not display the clock when the power |
is off. | ||
Beep | BEEP OFF | Disables the confirmation beep. |
Confirmation | BEEP ON | Enables the confirmation beep. |
Illumination | ILLU HI | Programs the LCD to the brightest illumination level. |
Dimmer | ILLU LO | Lowers the LCD illumination level. |
USB Charging Port Insert the USB connector of a battery powered USB device into the USB charging port on the front panel, which
provides 5 volts DC and 1.0 amps. The USB device will immediately begin charging.
Note: The USB charging port may not be compatible with every device due to differences in power requirements.
Note: This USB port provides power only, and will not playback music from a USB device.
Audio Press AUDIO to select between Volume (default), Bass,
Treble, Balance, Fader and EQ.
VOLUME BASSTREBLEBALANCEFADEREQ
6
XD1228 OPERATION
Audio Operation
Bass Press AUDIO until BAS appears
Rotate the volume knob left/right to adjust (-6 minimum / 6 maximum)
Treble Press AUDIO until TRE appears
Rotate the volume knob left/right to adjust (-6 minimum / 6 maximum)
Balance Press AUDIO until BAL appears
Rotate the volume knob left/right to adjust
(L12 - R12) 'BAL R=L' represents equal balance.
Fader Press AUDIO until FAD appears
Rotate the volume knob left/right to adjust
(F12 - R12) 'FAD R=F' represents equal balance.
Preset EQ Curves Press AUDIO until EQ appears. Rotate volume knob left/ right to adjust between POP, CLS, ROC and OFF (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve.
Tuner Operation
Seek Tuning Press TUNE nnor TUNE llfor more than 2 seconds to seek to the next strong station.
Manual Tuning Press TUNE nnor TUNE llmomentarily to change the radio frequency up or down one step at a time. Press and hold to advance quickly.
Am Fm Stereo Cd Player
FM Stereo/Mono Press BAND for more than 2 seconds to select mono or stereo (default) reception of the broadcast signal.
Band Press BAND to select between FM1, FM2, FM3 and AM1,
AM2 bands.
Storing and Recalling Up to 18 FM stations and 12 AM stations can be stored. Station Presets To store a station, select the desired band and station.
Press and hold the desired preset button for more than 2 seconds. When stored, the preset number will appear in the display. The station can be recalled anytime by pressing the corresponding preset button.
7
XD1228 OPERATION
CD Player Operation
Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback.
Eject CD Press the EJECT button to stop and eject the CD.
The unit will change to tuner mode.
Track Select Press TRACK llto skip to the beginning of the next track. Press TRACK nnto return to the beginning of the current track. Pressing TRACK nnagain skips to the beginning of the previous track.
Fast Forward and Press and hold TRACK llor TRACK nnto fast forward Reverse or reverse a track.
Pause Press l/ II to temporarily stop CD playback.
Press l/ II again to resume playback.
Intro Press INT to play the first 10 seconds of each track.
Press INT to cancel.
Repeat Press RPT to continuously repeat selected track.
Press RPT to cancel.
Random Press RDM to play all tracks in random order.
Press RDM again to cancel.
CD-R/CD-RWSome CD-Rs and CD-RWs may be incompatible with this Compatibility unit, depending on media type and recording method.
Note: CD-R recording sessions must be closed (finalized) for playback.
8
XD1228 OPERATION
Troubleshooting | ||
Problem | Cause | Action |
Yellow wire not connected or incorrect voltage | Check connections for proper voltage | |
Unit will not turn on | Red wire not connected or incorrect voltage | (11~16VDC) |
(no power) | Black wire not connected | Check connection to ground |
Fuse blown | Replace fuse | |
Unit has power | Speaker wires not connected | Check connections at speakers |
One or more speaker wires touching each | Insulate all bare speaker wires from each | |
(but no sound) | ||
other or touching chassis ground | other and chassis ground | |
Yellow or red wire touching chassis ground | Check for pinched wire | |
Unit blows fuses | Speaker wires touching chassis ground | Check for pinched wire |
Incorrect fuse rating | Use fuse with correct rating | |
Unit is not mounted correctly | Check mounting sleeve or add a backstrap | |
Excessive skipping | support | |
Physical defect in media (CD, CD-R or CD-RW) | Check media for scratches | |
CD mechanism position out of alignment | Press EJECT for 3 seconds to reset | |
Unit will not accept | CD mechanism position | |
a disc | CD transit screws still in place | Remove 2 transit screws located on top of |
the unit. |
Error Codes | ||
Error Code | Cause | Action |
ER-1 appears on the display | Disc error | Press eject or RESET |
ER-2 appears on the display | Mechanism error or disc is upside down | Press eject or RESET |
ER-3 appears on the display | Servo Error | Press eject or RESET |
9
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to
Fm Stereo Receivers
verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized Dual dealer and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure
to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav. com.
What to do?
1.Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
2.If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
3.Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
4.For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
•Call us toll-free at 1-866-382-5476
•E-mail us at cs@dualav.com
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the
company be liable for indirect, incidental or consequential damages.
XD1228 OPERATION
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
11
Specifications
CD Player | Frequency response: 20Hz-20kHz |
Channel separation @ 1kHz: >65dB | |
D/A converter: 1 Bit | |
FM Tuner | Tuning range: 87.5MHz-107.9MHz |
Usable sensitivity: 12dBf | |
50dB quieting sensitivity: 16dBf | |
Stereo separation @ 1kHz: 40dB | |
Frequency response: 30Hz-13kHz | |
AM Tuner | Tuning range: 530kHz-1710kHz |
Usable sensitivity: 30uV | |
Frequency response: 80Hz-2kHz | |
General | Speaker output impedance: 4~8 ohms |
Fuse: 5 amp AGC | |
Dimensions: 7' x 7' x 2' (178 x 178 x 51 mm) | |
Design and specifications subject to change without notice. |
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 5 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to noise ratio: 75dBA (reference: 1 watt into 4 ohms)
Dual Electronics Corp.
Toll Free: 1-866-382-5476
www.dualav.com
©2011 Dual Electronics Corp. All rights reserved. NSA0611-V01